Loading...
Serving Benbrook, TX and surrounding areas. (817) 438-1248
Benbrook Concrete Polishing & Epoxy Flooring installs epoxy coatings, polished concrete, garage floors, and more. We prep every slab right so your floor holds up for years.
Benbrook Concrete Polishing & Epoxy Flooring is a locally owned Concrete Flooring Contractor in Benbrook, TX. We offer 16 concrete flooring services - from epoxy coatings and polished concrete to stained floors, pool decks, and surface preparation. Whether your project is a single-car garage or a commercial warehouse, we handle the work from prep to final coat. We serve 12 cities across the greater Fort Worth area, and every job starts with a free on-site estimate.
Your garage floor absorbs every spill. Epoxy coating seals it permanently and holds up to vehicles, tools, and Texas heat.
Learn More
Warehouses and shop floors take a beating. Commercial epoxy handles heavy equipment and chemical exposure without wearing down.
Learn More
Tired of sweeping up concrete dust? A coated garage floor stays clean, resists stains, and makes the whole space feel finished.
Learn More
Polyaspartic cures faster than epoxy and handles temperature swings better - a strong choice for North Texas garages.
Learn More
Want a floor that looks like a showroom? Metallic epoxy creates a one-of-a-kind surface with deep, layered color and shine.
Learn More
Commercial kitchens and food-processing floors need a coating that handles moisture, heat, and chemical exposure without failing.
Learn More
Polished concrete turns a dull slab into a reflective, low-maintenance surface that holds up to decades of foot traffic.
Learn More
Add color and character to any concrete floor with staining - permanent tones that soak into the surface and never peel.
Learn More
Terrazzo flooring combines durability with visual richness - a classic material that wears beautifully for decades.
Learn More
A damp, dusty basement floor is uncomfortable and hard to clean. The right coating seals moisture out and makes the space usable.
Learn More
Good prep is the difference between a coating that lasts and one that peels. We grind and profile the slab before anything goes down.
Learn More
Unsealed concrete absorbs every spill and stain. A quality sealer stops that and protects the surface from moisture and wear.
Learn More
Cracked or worn concrete does not have to be replaced. Resurfacing restores the surface with a fresh layer that bonds to the old slab.
Learn More
Uneven floors cause tripping hazards and installation problems. Self-leveling overlays create a flat, smooth surface in one pour.
Learn More
Pool decks deal with water, UV exposure, and bare feet. A proper coating stays slip-resistant and keeps the surface looking sharp.
Learn More
Old tile, carpet, or failing coatings have to come off before anything new goes down. We handle the removal cleanly and efficiently.
Learn MoreCall or fill out our contact form and we will get back to you within 1 business day. We will ask a few quick questions - floor size, what the space is used for, and whether you have noticed any cracks or moisture. Then we schedule a free on-site estimate at a time that works for you.
During the visit, we look at the actual condition of your slab - checking for cracks, testing for moisture, and noting any previous sealers or coatings. You get a written estimate that covers prep, coats, finish options, and cleanup. No guesswork, no surprises once work starts.
Our crew handles everything - surface grinding, crack repair, coating application, and final walkthrough. Most jobs finish in two to three days. Before we leave, we walk you through the finished floor and give you care instructions so it stays looking great for years.
We carry full liability insurance on every project. Before we start, you can ask to see our credentials - we will have them ready. Working with an uninsured contractor puts your property and your claim at risk.
We have been serving homeowners and businesses in Benbrook and the surrounding Fort Worth area since 2020. We know the local soil conditions, the climate patterns, and the neighborhoods - and we have a reputation in this community to protect.
Every estimate is free, on-site, and in writing. We look at your actual slab before quoting a price - not a number pulled from a formula. If the job is not a good fit, we will tell you that too.
If there is an adhesion issue or defect from our installation, we come back and fix it. We give you care instructions at project completion and are reachable if questions come up after the job is done.
Ready to get started? Call (817) 438-1248 or send us a message.
"They showed up on time, did the grinding on day one, and had the epoxy down by end of day two. The garage looks completely different - no more oil stains soaking in, no more gray dust on everything. It has held up through two summers without any issues."
Marcus T., Fort Worth, TX - Epoxy Floor Coatings
"I was worried about the cracks in my slab because of the clay soil here. They inspected everything before giving me a quote, filled the cracks before coating, and explained what they were doing at each step. The finished floor has been solid for over a year."
Linda R., Burleson, TX - Garage Floor Coatings
"We needed the warehouse floor done over a weekend so we could reopen Monday. They finished on time, cleaned up completely, and the polished surface is much easier to keep clean than the old bare concrete. Would use them again for our second location."
Derek M., Mansfield, TX - Polished Concrete Flooring
We respond within 1 business day. There is no obligation - fill out the form and someone from our office will call you to schedule a free on-site estimate at a time that works for you.
(817) 438-1248Benbrook Concrete Polishing & Epoxy Flooring is based in Benbrook, TX and serves 12 cities across the Fort Worth area, including Fort Worth, Burleson, Mansfield, and Keller. Most jobs can be scheduled within the same week. If you are within Tarrant County or the surrounding area, reach out and we will confirm coverage at no charge.
Yes - and it is one of the most common reasons coatings fail early. Concrete absorbs moisture from the ground below, and if the slab is too wet when the coating is applied, it will eventually bubble or peel. A reputable contractor will test for moisture before starting. This is a standard step, not an upsell.
It does. When slabs get too hot in summer, epoxy can cure unevenly or too fast, leading to a weaker bond. Experienced local contractors start early in the morning during summer months or recommend fall and winter scheduling. The coating itself handles Texas heat fine once fully cured.
One-part floor paints look similar to epoxy on the label but behave very differently. True two-part epoxy bonds more deeply to the concrete and holds up to vehicle traffic and chemical spills in ways floor paint cannot. If a quote seems unusually cheap, ask specifically whether the product is a two-part system.
Clay soil expands when wet and shrinks when dry. That constant movement stresses slabs and causes cracking - especially in Benbrook homes built before 2000. A contractor should evaluate whether existing cracks are stable before coating. Coating over an active crack means it will split in the same spot within months.
Surface damage - staining, minor cracking, rough texture - is usually a resurfacing job. Structural issues like slab heaving, large active cracks, or soft spots underneath may require more involved repair. A contractor who looks at the floor in person can tell you which situation you are dealing with before you commit to anything.
A fine anti-slip texture is added to the top coat during application - usually a small upcharge and worth it for any floor that sees wet conditions. Ask before the job starts, because it is much harder to add after the coating has cured. The OSHA walking-working surfaces guidelines cover slip resistance standards in commercial settings.
Benbrook Concrete Polishing & Epoxy Flooring is a licensed and insured Concrete Flooring Contractor based in Benbrook, TX, serving the Fort Worth metro and 12 surrounding communities since 2020.
We hold a Texas contractor registration and carry full liability insurance on every project. Our license is issued by the State of Texas, and we are happy to provide documentation before any work begins.
Since 2020, we have completed residential and commercial concrete flooring projects across Tarrant County, covering all 16 services listed on this site - from basic epoxy coatings to polished concrete, metallic finishes, and full surface preparation.
Epoxy is the proven standard and works well for most garages. Polyaspartic cures faster, handles temperature swings better, and may be a better choice in North Texas where summer heat is extreme. The right answer depends on your timeline, budget, and how the space is used.
It needs to be fully removed or ground off before a new coating can bond properly. Applying a new coating over a failing old one is one of the most common causes of early peeling. Factor removal into your budget when getting quotes.
Ask each contractor what surface prep is included, how many coats are applied, and what the warranty covers. A quote that does not mention prep or only lists a final price is missing critical information. Comparing line-by-line is the only way to know what you are actually getting.
The Concrete Network is a useful resource for homeowners researching flooring options and contractor selection. When you are ready to move forward, call (817) 438-1248 or send us a message and we will set up a free on-site estimate.
Benbrook is a residential city of roughly 24,000 people in Tarrant County, just southwest of Fort Worth. Most homes here were built between the 1960s and 1990s, which means many garage slabs, driveways, and interior floors are original concrete that is now 30 to 60 years old. That age, combined with the expansive clay soil that runs through this part of Texas, makes concrete flooring work one of the most common home improvement projects in the area. You can read more about the city of Benbrook and its history on Wikipedia.
Two landmarks most Benbrook residents know well are Benbrook Lake, managed by the U.S. Army Corps of Engineers, and Benbrook Stables, a longtime community fixture near the lake. Homes within a short drive of the lake often deal with elevated soil moisture and seasonal drainage issues - conditions that put extra stress on concrete slabs and make moisture testing before any coating job especially important. The City of Benbrook handles development services and permit questions for the area.
We have been working on homes and commercial properties throughout Benbrook since 2020, from neighborhoods near City Hall on Mercedes Street to subdivisions closer to the Fort Worth line. Benbrook is a city where most people own their homes and plan to stay - and we do the work the same way, so you are not calling someone back in two years because a corner started peeling.
By appointment only, no walk-ins.
Benbrook Concrete Polishing & Epoxy Flooring
404 Childers Ave
Benbrook, TX 76126
team@benbrookconcretepolishingandepoxyflooring.com
Always open, 24/7.
Call (817) 438-1248 or send us a message - we respond within 1 business day and every estimate is free and on-site.